After repeated requests for beep codes i have decided to post them here maybe they could be pinned

Standard Original IBM POST Error Codes

Code Description

1 short beep System is OK

2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem

1 long, 1 short beep System board problem

1 long, 2 short beeps Display adapter problem (MDA, CGA)

1 long, 3 short beeps Display adapter problem (EGA)

3 long beeps 3270 keyboard card

IBM POST Diagnostic Code Descriptions

Code Description

100 - 199 System Board

200 - 299 Memory

300 - 399 Keyboard

400 - 499 Monochrome Display

500 - 599 Colour/Graphics Display

600 - 699 Floppy-disk drive and/or Adapter

700 - 799 Math Coprocessor

900 - 999 Parallel Printer Port

1000 - 1099 Alternate Printer Adapter

1100 - 1299 Asynchronous Communication Device, Adapter, or Port

1300 - 1399 Game Port

1400 - 1499 Colour/Graphics Printer

1500 - 1599 Synchronous Communication Device, Adapter, or Port

1700 - 1799 Hard Drive and/or Adapter

1800 - 1899 Expansion Unit (XT)

2000 - 2199 Bisynchronous Communication Adapter

2400 - 2599 EGA system-board Video (MCA)

3000 - 3199 LAN Adapter

4800 - 4999 Internal Modem

7000 - 7099 Phoenix BIOS Chips

7300 - 7399 3.5" Disk Drive

8900 - 8999 MIDI Adapter

11200 - 11299 SCSI Adapter

21000 - 21099 SCSI Fixed Disk and Controller

21500 - 21599 SCSI CD-ROM System

AMI BIOS Beep Codes

Code Description

1 Short Beep System OK

2 Short Beeps Parity error in the first 64 KB of memory

3 Short Beeps Memory failure in the first 64 KB

4 Short Beeps Memory failure in the first 64 KB Operational of memory

or Timer 1 on the motherboard is not functioning

5 Short Beeps The CPU on the motherboard generated an error

6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode

7 Short Beeps The CPU generated an exception interrupt

8 Short Beeps The system video adapter is either missing, or its memory is faulty

9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS

10 Short Beeps The shutdown register for CMOS RAM failed

11 Short Beeps The external cache is faulty

1 Long, 3 Short Beeps Memory Problems

1 Long, 8 Short Beeps Video Card Problems

Phoenix BIOS Beep Codes

Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

Code Description

1-1-3 CMOS read/write failure

1-1-4 ROM BIOS checksum error

1-2-1 Programmable interval timer failure

1-2-2 DMA initialisation failure

1-2-3 DMA page register read/write failure

1-3-1 RAM refresh verification failure

1-3-3 First 64k RAM chip or data line failure

1-3-4 First 64k RAM odd/even logic failure

1-4-1 Address line failure first 64k RAM

1-4-2 Parity failure first 64k RAM

2-_-_ Faulty Memory

3-1-_ Faulty Motherboard

3-2-4 Keyboard controller Test failure

3-3-4 Screen initialisation failure

3-4-1 Screen retrace test failure

3-4-2 Search for video ROM in progress

4-2-1 Timer tick interrupt in progress or failure

4-2-2 Shutdown test in progress or failure

4-2-3 Gate A20 failure

4-2-4 Unexpected interrupt in protected mode

4-3-1 RAM test in progress or failure>ffffh

4-3-2 Faulty Motherboard

4-3-3 Interval timer channel 2 test or failure

4-3-4 Time of Day clock test failure

4-4-1 Serial port test or failure

4-4-2 Parallel port test or failure

4-4-3 Math coprocessor test or failure

Low 1-1-2 System Board select failure

Low 1-1-3 Extended CMOS RAM failure